19 research outputs found
Tunable magnetism on the lateral mesoscale by post-processing of Co/Pt heterostructures
Controlling magnetic properties on the nm-scale is essential for basic
research in micro-magnetism and spin-dependent transport, as well as for
various applications such as magnetic recording, imaging and sensing. This has
been accomplished to a very high degree by means of layered heterostructures in
the vertical dimension. Here we present a complementary approach that allows
for a controlled tuning of the magnetic properties of Co/Pt heterostructures on
the lateral mesoscale. By means of in-situ post-processing of Pt- and Co-based
nano-stripes prepared by focused electron beam induced deposition (FEBID) we
are able to locally tune their coercive field and remanent magnetization.
Whereas single Co-FEBID nano-stripes show no hysteresis, we find hard-magnetic
behavior for post-processed Co/Pt nano-stripes with coercive fields up to 850
Oe. We attribute the observed effects to the locally controlled formation of
the CoPt L1 phase, whose presence has been revealed by transmission
electron microscopy.Comment: Accepted for publication in Beilstein J. Nanotechno
Evidence for universal conductance correction in a tunable strongly coupled nanogranular metal
We present temperature-dependent conductivity data obtained on a sample set
of nanogranular Pt-C with finely tuned inter-grain tunnel coupling strength g.
For samples in the strong-coupling regime g > g_C, characterized by a finite
conductivity for T -> 0, we find a logarithmic behavior at elevated
temperatures and a crossover to a sqrt(T)-behavior at low temperatures over a
wide range of coupling strengths g_C = 0.25 < g <= 3. The experimental
observation for g > 1 is in very good agreement with recent theoretical
findings on ordered granular metals in three spatial dimensions. The results
indicate a validity of the predicted universal conductivity behavior that goes
beyond the immediate range of the approach used in the theoretical derivation
Influence of the substrate-induced strain and irradiation disorder on the Peierls transition in TTF-TCNQ microdomains
The influence of the combined effects of substrate-induced strain, finite
size and electron irradiation-induced defects have been studied on individual
micron-sized domains of the organic charge transfer compound
tetrathiafulvalene-tetracyanoquinodimethane (TTF-TCNQ) by temperature-dependent
conductivity and current-voltage measurements. The individual domains have been
isolated by focused ion beam etching and electrically contacted by focused ion
and electron beam induced deposition of metallic contacts. The
temperature-dependent conductivity follows a variable range hopping behavior
which shows a crossover of the exponent as the Peierls transition is
approached. The low temperature behavior is analyzed within the segmented rod
model of Fogler, Teber and Shklowskii, as originally developed for a
charge-ordered quasi one-dimensional electron crystal. The results are compared
with data obtained on as-grown and electron irradiated epitaxial TTF-TCNQ thin
films of the two-domain type
A Tunable Strain Sensor Using Nanogranular Metals
This paper introduces a new methodology for the fabrication of strain-sensor elements for MEMS and NEMS applications based on the tunneling effect in nano-granular metals. The strain-sensor elements are prepared by the maskless lithography technique of focused electron-beam-induced deposition (FEBID) employing the precursor trimethylmethylcyclopentadienyl platinum [MeCpPt(Me)3]. We use a cantilever-based deflection technique to determine the sensitivity (gauge factor) of the sensor element. We find that its sensitivity depends on the electrical conductivity and can be continuously tuned, either by the thickness of the deposit or by electron-beam irradiation leading to a distinct maximum in the sensitivity. This maximum finds a theoretical rationale in recent advances in the understanding of electronic charge transport in nano-granular metals
Granular Hall sensors for scanning probe microscopy
Scanning Hall probe microscopy is attractive for minimally invasive characterization of magnetic thin films and nanostructures by measurement of the emanating magnetic stray field. Established sensor probes operating at room temperature employ highly miniaturized spin-valve elements or semimetals, such as Bi. As the sensor layer structures are fabricated by patterning of planar thin films, their adaption to custom-made sensor probe geometries is highly challenging or impossible. Here we show how nanogranular ferromagnetic Hall devices fabricated by the direct-write method of focused electron beam induced deposition (FEBID) can be tailor-made for any given probe geometry. Furthermore, we demonstrate how the magnetic stray field sensitivity can be optimized in situ directly after direct-write nanofabrication of the sensor element. First proof-of-principle results on the use of this novel scanning Hall sensor are shown
Focused electron beam induced deposition: A perspective
Background: Focused electron beam induced deposition (FEBID) is a direct-writing technique with nanometer resolution, which has received strongly increasing attention within the last decade. In FEBID a precursor previously adsorbed on a substrate surface is dissociated in the focus of an electron beam. After 20 years of continuous development FEBID has reached a stage at which this technique is now particularly attractive for several areas in both, basic and applied research. The present topical review addresses selected examples that highlight this development in the areas of charge-transport regimes in nanogranular metals close to an insulator-to-metal transition, the use of these materials for strain- and magnetic-field sensing, and the prospect of extending FEBID to multicomponent systems, such as binary alloys and intermetallic compounds with cooperative ground states. Results: After a brief introduction to the technique, recent work concerning FEBID of Pt–Si alloys and (hard-magnetic) Co–Pt intermetallic compounds on the nanometer scale is reviewed. The growth process in the presence of two precursors, whose flux is independently controlled, is analyzed within a continuum model of FEBID that employs rate equations. Predictions are made for the tunability of the composition of the Co–Pt system by simply changing the dwell time of the electron beam during the writing process. The charge-transport regimes of nanogranular metals are reviewed next with a focus on recent theoretical advancements in the field. As a case study the transport properties of Pt–C nanogranular FEBID structures are discussed. It is shown that by means of a post-growth electron-irradiation treatment the electronic intergrain-coupling strength can be continuously tuned over a wide range. This provides unique access to the transport properties of this material close to the insulator-to-metal transition. In the last part of the review, recent developments in mechanical strain-sensing and the detection of small, inhomogeneous magnetic fields by employing nanogranular FEBID structures are highlighted. Conclusion: FEBID has now reached a state of maturity that allows a shift of the focus towards the development of new application fields, be it in basic research or applied. This is shown for selected examples in the present review. At the same time, when seen from a broader perspective, FEBID still has to live up to the original idea of providing a tool for electron-controlled chemistry on the nanometer scale. This has to be understood in the sense that, by providing a suitable environment during the FEBID process, the outcome of the electron-induced reactions can be steered in a controlled way towards yielding the desired composition of the products. The development of a FEBID-specialized surface chemistry is mostly still in its infancy. Next to application development, it is this aspect that will likely be a guiding light for the future development of the field of focused electron beam induced deposition